RS485/RS422/RS232 serial to ethernet converter

Overview

RS232/485/422 serial to Ethernet server is an Ethernet TCP /IP protocol compliant bidirectional conversion transmission equipment, changing traditional serial to network communication, can directly access to the network serial devices through software. Compact designed, durable, user-friendly interface allows you to stable and reliable serial networking solutions.

Serial port, Ethernet port and power port with surge protection

Surges, often aroused by transient high voltage generated by lightning etc., can cause damage to the electrical equipment. Surge protection takes leading technology to protect serial port, Ethernet port and power port. Equipped with serial networking solution, it stops electrical equipment away from the interference of voltage variations and electrical noise.

Most commonly it is used for connecting a serial RS232, RS485 or RS422 device such as a serial printer, barcode scanner, scale, GPS, Sensor or any other consumer or industrial device with a serial interface, to a computer over a standard LAN network. The advantage of this is obvious; you will be able to control, monitor and communicate with your serial device remotely from a central computer. No need to walk all the way down to the other end of the factory to check your serial device.

Features

No PC, can be two consecutive serial devices over a network peer connection mode

All signals built in 1.5KV surge protection

Can be configured through the network Web

Provide TCP Server, TCP Client, and UDP Socket variety of operating modes

2-wire or 4-wire RS485 automatic data flow control

Asynchronous transmission, point to point utilization rate up to 115200bps

Support 5-16V wide power input

Specifications

Parameter	Specifications
Signal protection	1.5KV ESD
Power supply	DC Voltage : DC 5~16V
Ripple	<20mv
port	One RJ45 port: Connecting STP/UTP category-5 twisted pairs, EIA568A/B One Crimp port: 8 Crimp Terminals
LED	PWR (Power) LAN (RJ45 port connection / transfer data) P1 (P1 port to transfer data) P2 (P2 port to transfer data)
MAX power consumption	5W
Operating temperature	-10~55ºC
Operating humidity	5%~90%
Power supply	-40~70ºC
Maintaining humidity	5% ~ 90% non-condensing
Dimensions	86mm X 75mm X 25mm

Application

Contact us if you need more details on Serial to Ethernet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Serial Devices Converter、Serial over Network. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Serial Device Server > RS485/RS422/RS232 Serial To Ethernet Converter